SKYCO | OSPHO Metal Treatment-Rust Converter 1-Gallon

Description

SKYCO | OSPHO Metal Treatment-Rust Converter 1-Gallon

SKYCO OSPHO Metal Treatment-Rust Converter is the #1 Metal Treatment/Rust Converter on the market today.

OSPHO can be applied to just about ANY rusted or non-rusted steel surfaces including: Vehicles, Trailers, Fences, Iron Railings, Sheet Metal, Outside Tanks, Garage Doors, Lawn & Garden Equipment, Marine Vessels & Equipment, Burner Stoves, Metal Roofs, Window Trim, Steel Supports, Coins, and more….

OSPHO can be used on ALL Ferrous and non-Ferrous metals and is a GREAT protectant of new metals. OSPHO does require solvent-based top coats. Absolutely NO water-based top coats as they will make the finished coating reactivate causing bubbles, blisters, and bleed thru. You can use a water-based product as long as the direct contact of the treated metal is coated with a solvent-based primer.

OSPHO is a balanced formula of Phosphoric Acid, Dichromates, Wetting Agents, and Extenders. OSPHO is environmentally safe and non-flammable. OSPHO seals out moisture and prevents future rust from forming. OSPHO is primarily used for bare-metal applications but can be used on painted surfaces as long as the quality of the paint is not compromised. Test trial samples before using Epoxy or other paint systems. A paint job will last much longer after an application of OSPHO because subsequent paint coatings attach themselves so tightly that moisture and oxygen cannot attack the metal.

OSPHO is water-thin, and therefor covers a larger area then paint, and goes on easily. OSPHO is equally effective for exterior and interior work alike. OSPHO safely dissolves bleeding rust from many painted surfaces. For best results, use OSPHO at temperatures no lower than 36*. Excess dew and humidity may prolong drying time, causing a reoccurrence of the drying process resulting in a powdery buildup. Spray equipment should be flushed out with water after using. DO NOT USE ANY METAL SPRAY EQUIPTMENT! Clean brushes with water. Avoid spreading OSPHO on adjacent areas such as concrete, masonry and stonework as it will etch/bleach almost immediately.

How it works:
• Converts Iron Oxide (Rust) to Iron Phosphate
• Grows Zinc Phosphate to seal and protect for the future
• Can be used on all Ferrous and Non-Ferrous Metals

Can be applied to ANY rusted or non-rusted steel surfaces including:

• Marine Vessels & Equipment
• Burner Stoves
• Vehicles, and Trailers
• Iron Railings and Fences
• Sheet Metal
• Window Trim
• Metal Roofs
• Steel Supports
• Garage Doors
• Outside Tanks
• Lawn & Garden Equipment
• Coins AND MORE!!!

To view the most recent Directions and Technical Data Sheet, please click here.