PC Products | PC Universal Glue

DESCRIPTION: High performance PC-Universal Glue™ is a flexible, non-foaming, high solids glue that can be used for bonding, gluing and sealing all types of surfaces without expansion and foaming. The Heavy duty glue dries clear, and forms a flexible, tenacious bond (approximately 1700 psi, if undiluted) to most surfaces. The glue may be diluted with clean water. Superior sealer and primer for drywall and concrete. Can be painted after dried.

FEATURES: High Solids Concentrate.  No need for multiple types of glue.  This glue does it all.  Contains no fillers.  BOND * SEAL * GLUE :  Highest strength of any glue available.  Wood – Glass – Metal – Foam – Tile – Fabrics – Brick and much more!  PC-Universal Glue™ is a high performance adhesive that has unlimited uses. The Non-Foaming formula provides ultimate strength (1700psi). The glue is a white color, but dries clear. This product may be diluted with water.  Once the product is fully cured, the bond will be resistant to gasoline, oils, grease, salt water, mild detergents and acids and mold and mildew.  Comprised of a 100% non-toxic formulation. No VOC’s, Isocyanides or formaldehyde.

Directions for use:

Apply glue to both sides of surfaces to be bonded and let stand for 1-2 minutes before bonding together. For heavy duty bonding, use as in container. No mixing required. Prior to using, make sure all surfaces and clean and free on debris, oil, rust etc. Glue may be diluted up to 25% for further coverage and economy. For use as a sealer, the glue may be diluted up to a 5:1 Ratio by mixing 1 part of PC-UNIVERSAL GLUE with 5 parts of water. After diluting, the glue may be spread on the bonding surfaces. Allow to dry for 1 hour. Apply undiluted glue to surface and tape or clamp in place until fully cured. Use at temperatures above 50°F (10°C) and 200°F (92°C). Glue will not bond to: Cast Metals, polyethylene, Teflon®, un-backed vinyl, P.V.C., and polypropylene. Test area if in doubt. Cures in 24 hours. DO NOT ALLOW TO FREEZE. 1700 psi. bond strength.

PC-Universal Glue can be applied with a roller, brush or directly from the container. PC-Universal glue may be diluted for bonding where maximum strength is not needed. For sealing porous masonry or drywall, the solution may be up to 5 parts water to 1 part glue. For best results, apply glue at temperatures above 50°F and do not expose to temperatures above 200°F.

• High performance adhesive glue
• PC-Universal glue can be diluted up to a 5:1 Ratio for use as a clear sealer
• PC-Universal glue can be diluted for bonding into mortar mixes
• Bonds to Wood, Glass, Metal, Foam, Acrylic, Paper, Tile, Fabrics, Brick, Concrete, and much more
• Resistant to gasoline, oils, grease, salt water, mild detergents and acids and mold and mildew
• 1700 psi. bond strength
• Cures in 24 hours
• Can be painted after dried.
• Goes on White, Dries Clear
• Interior or exterior applications
• BOND – SEAL – GLUE
• Household – Industrial – Hobbyists
• Arts & Crafts – Wood Working
• High Solids Concentrate
• 100% Eco-Friendly, non-toxic Formula
• Non-solvent, No VOC’s, No Isocyanides, No formaldehyde.

To view the most recent manufacturer data sheet, please click here.