DRYLOK Fast Plug is a quick setting hydraulic waterstop & anchoring cement. It sets in 3-5 minutes to stop active leaks, even under pressure. Seals open joints, very large cracks in masonry walls and floor and wall joints.
- Fast setting hydraulic cement Sets in 3-5 minutes
- Stops water, even under pressure
- Patch mortar joints, cracks and holes in masonry walls
- No top-coat required
- Marine Grade
- Anchors metal to concrete.
- Used for stopping active water leaks, Seawall repairs, Pool Repairs, Foundation Leaks.
- Ideal for sealing floor and wall joints and settlement cracks in masonry walls and swimming pools.
This fast setting hydraulic cement patches holes even where water is actively flowing through them. Mix only enough for immediate use, because DRYLOK Fast Plug sets in 3-5 minutes. Cannot be reworked once it has set.
For Active Leaks (the presence of flowing water through a break in the surface): Mix appropriate amount of Fast Plug. In approximately 21/2 – 3 minutes, the mixture will become warm to the touch which indicates it is commencing to set. At this time force the Fast Plug into the opening with the palm of the hand. Hold in place for 3-5 minutes, assuring a complete set and sufficient bond to stop the flow of water. The patched area may be smoothed and trimmed to the surrounding area in approximately 5 minutes. Fast Plug may be painted when set with DRYLOK Masonry Waterproofer, Latex Base DRYLOK Masonry Waterproofer, DRYLOK Powdered Masonry Waterproofer or DRYLOK Concrete Floor Paint.
For Inactive Leaks, Patching, Anchoring: Thoroughly soak the area to be patched. This will prevent the surface from sucking the water out of the patching material. Apply with knife or trowel. Use the surface to smooth the patch evenly. When anchoring, chisel or drill hole in the masonry surface slightly larger than item to be anchored. Make certain mixed Fast Plug is tamped firmly into hole and around metal part.
|Dimensions||16 x 16 x 18 in|